HiQ packages
HiQ packages
Smart Machine

The intelligent injection unit
The HiQ packages offer add-ons for the existing UNILOG B8 machine control system software. They provide additional features to give the operator more information about the process, and to facilitate operation of the equipment.
- Conservation of resources through minimization of scrap
- Increased productivity and process stabilization
- Quality improvement
- Improved process monitoring
- Additional process control functionality
HiQ packages

- HiQ Melt
Is a method to monitor the material quality. The energy consumption in plasticizingis measured via the torque of the screw along the plasticizing stroke.
- HiQ Flow®
Is a software which compensates for temperature and batch fluctuations. During the injection phase, a viscosity value is determined. If a deviation occurs, the machine calculates a compensation action to keep the part weight consistent.
- HiQ Cushion® (MicroPower only)
This melt cushion control system is able to recognise trends in the change of the cushion length and compensate it within certain limits.
- HiQ Metering
Is a method to actively close a non-return valve. An additional step is programmed between the end of metering and the decompression stroke, during which the check valve is closed by targeted screw movements.
- HiQ Packing®
The injection molding process for a uniform pressure distribution in the holding pressure phase. This is e.g. an essential prerequisite for green parts free of cracks in Powder Injection Molding. The HiQ Packing® program enables an even more precise control of the screw movement during holding pressure switchover and the subsequent holding pressure phase.
Downloads







